G2-FL250R Frame
This is a mockup of a subframe I will be making out of 1-1/4" tube steel. This upper cage is an aftermarket predator cage that is a direct bolt on to the stock heavy ladder frame of the FL250.
Here is a picture of the front of the mock up lower frame.
Here is a trial fit of the motor and transmission to see if I have enough room to make everything fit.
I should have plenty of room behind the seat for the pipe. Not sure of the manufacturer of the pipe, but I think its a Kustom Kraft.
Left side of the buggy. Its gonna be tight, but it will work.
One last pic of the lower frame mockup.
